Publicidad
4.
Install wall plate assembly
using two lag bolts
and two washers
. Tighten the lag bolts only until they are pulled
15
16
17
firmly against the wall plate.
NOTE
: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt and shifting the
wall plate until level. Tighten the bottom lag bolt when adjustments are complete.
CAUTION:
Avoid potential personal injury or property damage! All lag bolts MUST BE firmly tightened to prevent
unwanted movement of the wall plate
. Ensure the wall plate is securely fastened to the wall before continuing on to the
15
next step.
4
15
15
16
17
16
13
Publicidad
