Screw Tightening Calibration - Pratissoli KF Serie Manual De Reparación

3

SCREW TIGHTENING CALIBRATION

Description Exploded
view pos.
Cover Fixing 9
Screw
Piston Fixing 29
Con-Rod Cap 16
Fixing Screw
Head Fixing 39
Screw
Valve cover screw 40
Lifting bracket 57
fixing screw
Oil drain plug 11
Outlet duct plug 59
* The con-rod cap fixing screws must be tightened
respecting the phases indicated on pag. 18.
** The head fixing screws exploded view pos. 39 must
be tightened with a torque wrench, lubricating the
threaded shank, respecting the order shown in the
diagram in Fig. 24.
*** The valve cover fixing screws exploded view pos. 40
must be tightened with a torque wrench, lubricating
the threaded shank, respecting the order shown in
the diagram in Fig. 24.
Material Tightening
torque Nm
8.8 10
AISI 416 20
12 R 30*
12.9 80**
12.9 120***
8.8 40
Nickel- 40
plated
brass
AISI 316L 40
Fig. 24
23