Sauder 408363 Manual Del Usuario página 11

Step 6 Step
Fasten the RIGHT END (A) and the LEFT END (B) to the
å
BACK (E). Tighten four TWIST-LOCK® FASTENERS.
Notched edge
www.sauder.com/services
B
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Notched edge
A
E
408363
®
FASTENER
Dowel end
Page 11