Publicidad
Step
Step 20
To make adjustments to the drawers, loosen SCREW #4 in the SLIDES a 1/4 turn, then turn
å
the cam clockwise or counter-clockwise. Notice how the drawer raises or lowers as you turn
the cam. By adjusting the drawers this way, it will help the DRAWER FRONTS line up better
when closed. Tighten the SCREWS when fi nished with adjustments.
NOTE: Use SCREW #3 in the small drawers.
å
NOTE: Please read the back pages of the instruction booklet for important
å
safety information.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
The higher the screw in the oblong hole,
the higher your drawer front will be. The
lower the screw, the lower the drawer front.
www.sauder.com/services
Loosen screw #4 a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tighten screw #4.
4
3
Cam
408363
Page 25
Publicidad
