Multimetrix DM 92 Manual De Instrucciones página 17

English
Functional Description
Calculation
functions
Adding
distances
Subtracting
distances
Multiplying to
compute areas
Multiplying to
compute volumes
Adding areas
Adding volumes
Recording
measurement
M1 - M5 memory
registers
Store
measurements
Recall memory
Clear all memory
register
Tachometer
Follow the instructions as shown below for making calculations:
Multiplying =
Adding =
Subtracting = –
Measure = ▲
▲ ▲
▲ ▲ –
▲ ▲
▲ ▲ ▲
▲ ▲
▲ ▲
▲ ▲ ▲
▲ ▲ ▲
The DM 92 has 5 memory registers (M1, M2, M3, M4, M5) and two
calculations memories in
Press the "memory mode" key once to turn on memory. If any value is
already stored, the icon will appear on the LCD, showing where the
measurement is stored. Otherwise the screen remains blank, indicating all
memory registers are empty.
Take a measurement, press and release the "memory mode" key until you
reach the desired memory register. Then, while blinking, press the key
"store to memory" once. The memory icon will disappear to indicate that it
has store the data and that the instrument is back to the measurement
now.
Press and release the "memory mode" key until you reach the desired
memory register. Then, while blinking, press the "recall memory" key.
Press the "memory mode" key until all 5 memory icons are blinking, then
press the "clear / unit convert / off" key; all memory stored will be erased
and your unit will automatically go back to the measurement mode.
or .
17