Electrical Safety; Technical Data; Noise And Vibration - Ferm JSM1026 Traducción Del Manual Original

EN
Battery tool use and care
a) recharge only with the charger specified
by the manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically
designated battery packs.
Use of any other battery packs may create a
risk of injury and fire.
c) when battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
if contact accidentally occurs, flush with
water. if liquid contacts eyes, additionally
seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power
tool is maintained.
for the charger
intended use
Charge only CDA1094 type rechargeable battery
packs. Other types of batteries may burst causing
personal injury and damage.
a) the appliance is not to be used by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction
b) Children being supervised not to play with
the appliance
c) Do not recharging non-rechargeable
batteries!
d) During charging, batteries must be placed
in the well ventilated area!
4
Kickback
Kickback is the upward and backward
movement of the saw blade when the saw blade
unexpectedly touches an object.
Securely hold the machine during use.
Keep your attention focused on the operation.
Kickback is usually caused by:
- unintentionally touching hard objects or
materials with the rotating saw blade;
- a blunt saw blade;
- a saw blade that is not properly mounted;
- sawing into a previous cut;
- a lack of attention to the operation;
- an instable stance.

eLeCtriCaL safety

Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
● D o not use the machine if the mains cable or
the mains plug is damaged.
● O nly use extension cables that are suitable for
the power rating of the machine with a minimum
thickness of 1.5 mm . If you use a extension
2
cable reel, always fully unroll the cable.

teCHniCaL Data

Charger
Input of charger
Output of charger
Rechargeable battery
Battery charging time
No-load speed
Max. sawing depth (wood)
Max. sawing stroke
Weight

nOise anD ViBratiOn

Sound pressure (L )
pa
Acoustic power (L )
wa
Uncertainty (K)
Vibration (wood)
Vibration (metal)
Uncertainty (K)
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
CDA1095
100-240V~ 50/60Hz 15W
13,5V d.c. 400mA
12 V Li-ion 1.5 Ah
3-5 hours
2100 min
-1
25 mm
13 mm
0.89 kg
70 dB(A)
81 dB(A)
3 dB(A)
3.33 m/s
2
3.98 m/s
2
1.5 m/s
2