Cleaning And Maintenance - Ferm JSM1026 Traducción Del Manual Original

EN
Use
switching on and off
● M ove to lock bar to left/right and press the
main trigger to start the machine
● T o switch off the machine, release the on/off
switch (1).
Hints for optimum use
● C lamp the workpiece. Use a clamping device
for small workpieces.
● D raw a line to define the direction in which to
guide the saw blade.
● F irmly hold the machine by the grip.
● S witch on the machine.
● W ait until the machine has reached full speed.
● P lace the saw shoe on the workpiece.
● S lowly move the machine along the pre-drawn
line, firmly pressing the saw shoe against the
workpiece.
● D o not apply too much pressure on the
machine. Let the machine do the work.
● S witch off the machine and wait for the
machine to come to a complete standstill
before putting the machine down.
CLeaning anD
MaintenanCe
Before cleaning and maintenance,
always switch off the machine and
remove the battery from the machine
● R egularly clean the housing with a soft cloth.
● K eep the ventilation slots free from dust and
dirt. If necessary, use a soft, moist cloth to
remove dust and dirt from the ventilation slots.
● R egularly clean the saw blade to avoid
inaccuracies during use.
replacing the saw blade
Worn or damaged saw blades must be replaced
immediately.
Only use sharp and undamaged saw
blades.
6
warranty
Consult the enclosed warranty terms.
enVirOnMent
Disposal
The product, the accessories, and the packaging
must be sorted for environmentally friendly
recycling.
Only for eC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/
EU for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
friendly way.