Setup / Operation - Klarstein Zap Dry Manual Del Usuario

SETUP / OPERATION

Before fi rst use
1. Remove the operating instructions and other accessories from the inside of the
tumble dryer and remove all packaging materials. Place the tumble dryer on a fl at,
hard surface. The lint control is carefully adjusted, so do not place the unit on soft
surfaces such as carpets, as this could block the air inlet, which could result in a fi re
hazard.
2. The tumble dryer dries through the gap between the cover and the surroundings.
This gap must never be blocked, as the drying effect could be impaired and fi re
may occur.
3. Spin the laundry in the washing machine or wring it by hand so that it no longer
drips. Wet local control clothing must not be placed directly in the tumble dryer.
4. Hang the clothes on the clothes hooks. Try to hang the clothes loosely as this will
improve the drying effect. Do not place clothing directly on the air outlet as it will
block the wind and impair the drying effect.
Use of the tumble dryer
1. The tumble dryer is operated by a microcomputer. Press the key. The device has the
following function keys and indicator displays:
Button Function
ON/OFF Touch to power on and off
TIMER You can set your own drying time. Press and increase 10 minutes
drying time. The maximum can be set at 5 hours.
Program Select TOWEL, UNDERWEAR BABY CLOTHES, or DEHUMIDY/
DEODORIZE.
mode display
time display
touch keys
EN
13