Klarstein Zap Dry Manual Del Usuario página 14

EN
14
2. When the power plug is plugged into the outlet, the unit will perform a self-test and
all indicator lights will flash. After the self-test, the device will automatically switch to
standby mode.
3. Press the switch button to start. The factory default function is UNDERWEAR BABY
CLOTHES. At this time, the display window will display "1:30" for two seconds. The
unit will start to warm up, the UNDERWEAR BABY CLOTHES indicator will flash
and the time display will start to count down. As soon as the countdown has ended,
the device will switch off automatically. The cooling fan should then continue to run
for a minute to release the excess heat.
4. The preset drying times are: TOWEL 3 hours; UNDERWEAR BABY CLOTHES
1 hour 30 minutes; DEHUMIDY/DEODORIZE 30 minutes. The drying time of each
program can be adjusted according to individual needs. Each time the TIMER
button is pressed, the drying time is adjusted. Each press of this button increases the
drying time by 10 minutes. A maximum of 5 hours can be set. If you try to set more
than 5 hours, the timer will automatically start again at 10 minutes.
5. You can choose from the following 3 programs
Programme
TOWEL
UNDERWEAR BABY CLOTHES
DEHUMIDIFY / DEODORIZE
6. Aroma function: drop one or two drops of fragrance on the sponge and place the
sponge in the aroma container (underneath the unit). Close the cover. During the
drying process, the fragrance will be released into the laundry drum and the clothes
will absorb the scent.
Application
For drying cotton or thick fabric
Drying of soft fabric
Dehumidifying and adding scent