Removing Your Mask - ResMed Swift FX Bella Gray Información Del Usuario

WARNING
Using Swift FX Bella Gray may cause ear soreness. If symptoms
occur, consult your physician.

Removing your mask

To remove your mask, place your fingers underneath the straps and lift
them away from your ears.
Removing the headgear
1–2. Remove each buckle by slightly twisting the buckle and
pulling away from the node on the pillows.
Note: The strap and soft sleeve are not intended to be dissassembled
and can be washed together, while attached to the buckle.
Headgear reassembly steps (if required)
If you have disassembled your headgear it needs to be reassembled
before attaching to the pillows.
1. Thread each strap through the soft sleeve. Pull the soft sleeve
up until it sits flush against the widest part of the strap.
Ensure the soft sleeve lies flat on the strap.
2. Hold the buckle with the arrow facing up.
A. Ensuring the notches of the strap are facing the arrow
head, thread the end of the strap down through the
opening closest to the arrow head on the buckle.
B. Bring the end of the strap up through the other opening,
making sure that the notches on the strap sit against
each other.
Repeat these steps with each strap.
3. Ensure that the straps are not twisted.
2