Product Description And Specifications - Bosch GPO 14 CE Professional Manual Original

OBJ_BUCH-3431-001.book Page 15 Monday, November 6, 2017 10:02 AM
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for polishing and brushing metal and
coated surfaces as well as for polishing stone without the use
of water.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Fastening screw for bow handle
2 Bow handle (insulated gripping surface)
3 Spindle lock button
4 Thumbwheel for speed preselection
5 On/Off switch
6 Grinder spindle
7 Auxiliary handle (insulated gripping surface)*
8 Clamping mandrel*
9 Clamping flange*
10 Buffing disc*
11 Clamping nut*
12 Spacer discs*
13 Polishing plate*
14 Round nut*
15 Lamb's wool bonnet for polishing plate*
16 Polishing sponge*
17 Lambskin polishing bonnet for polishing sponge*
18 Rubber sanding plate*
19 Sanding sheet*
20 Felt polishing disc*
21 Cup brush*
22 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Bosch Power Tools
Technical Data
Polisher
Article number
Rated power input
Output power
Rated speed
Speed control adjustment
Sanding pad diameter, max.
Thread of grinder spindle
Max. spindle length
Weight according to
EPTA-Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); Sound power level
102 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
Polishing: a =6.0 m/s , K=1.5 m/s
h
2
Disk sanding: a =4.5 m/s , K=1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Assembly
Mounting the Protective Devices
 Before any work on the machine itself, pull the mains
plug.
 Operate your machine only with the auxiliary handle 7
or bow handle 2.
English | 15
GPO 14 CE
3 601 C89 0..
W 1400
W 800
-1
min 3000
-1
min 750 – 3000
mm 180
M 14
mm 21
kg 2.5
/II
,
2
.
1 609 92A 45K | (6.11.17)