Manual Search; Bluetooth Function; Using The Microphone - Trevi XF 3800 PRO Guía Rápida

ENGLISH
3. Press the , Play/Pausa(13)

and saves them automatically). The station's number stored depends on the radio signal in your area. During the search, press
, Play/Pausa button(13) on unit to stop recording.

4. Use the (15) and
: 9
radio stations saved in memory.
5. To call the number of a preset station using the number keys(24) on the remote control.
For example, to call up the station number 12, first press 1 and then 2.

MANUAL SEARCH

1. Press and hold for a few seconds the keys
the remote control, the search will stop 'when will' received a radio broadcaster.
DIRECT RECALL OF FREQUENCY
1. Use the keypad (24) on remote control to tune the desired frequency.
For example, to listen to 93.1MHz frequency type 9 3 1.
Note:
- The FM reception depends on the place where you place the unit.
- The proximity of TV sets, fluorescent lamps or other appliances may cause interference in the reception of radio programs,
in this case, move this unit.

BLUETOOTH FUNCTION

1. Turn on the machine and press the MODE(11) on unit, or MODE(31) button on remote control to select the Bluetooth function,
the display shows "BLUE".
2. In the Bluetooth mode, the symbol
3. Activate the Bluetooth feature on the external device to be coupled.
4. Initiate a search for devices. After select the "XF 3800 PRO".
5. Enter the password "0000" if required.
6. Press the (13) button on the unit or the key(26) on remote control, to start playing and the buttons

the unit, or the keys
:
PLAY ON INPUT USB/SD
1. Turn on the unit.
2. Insert a USB memory or an SD card into the USB or SD(16) slot. Playback starts automatically.
3. To pause playback, press the
4. To resume playback, press the
5. Press (15) button on unit
:
button on unit or LAST(27) on remote to go to the previous tracks.
9
6. Using the numeric keypad(24) on remote control you can directly enter the number of the song you want to play.
7. Press once REPEAT button(23) on the remote, the display will show "ONE", to continually play the same track; press it a second
time, the display will show "ALL" to continuously play all songs in the USB/SD.
Note:
- The player may not support some USB/SD devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.
- From the computer to format the USB memory/SD FAT (16 or 32).
AUX-IN
1. Press the MODE button(11) on the unit or press the button(31) on the remote control and select the "LINE IN" function.
2. Connect any unit equipped with audio output, through a cable 3.5mm jack (included) to the AUX IN(17).
3. Use the external device from their commands.

USING THE MICROPHONE

1. Connect the supplied microphone into the jack MIC1 or MIC2(3).
2. Turn on the microphone using the switch on the handle of the microphone to the ON position.
on the unit to activate the auto memory (the radio starts an automatic search radio stations
(12) on the unit, or the keys
(15) or
:
on display will start flashing, the system automatically enters search mode.
NEXT(34) and LAST(27) for selection of songs.
9
(13) button on the unit or the key

(13) on the unit or the key

or key NEXT(34) on remote control while listening to switch to the next track. Press the
:
NEXT(34) and LAST(27)
: 9
(12) on the unit, or the buttons
9
(26) on remote control, the display will show "PAUS".

(26) on the remote control.

13
XF 3800 PRO
on the remote control to listen to the various
NEXT(34) and
: 9
(15) o
:
LAST(27) on
(12) on
9
(12)
9