Assembly Diagram - HAMPTON BAY Home Depot SKU 522-541 Manual De Instrucciones

6. Attach the harp (3) to the "U" shaped support shelf (7).
7. Screw the bulb (4) (included) into the lamp-socket (5).
8. Place the fabric shade (2) on the harp (3), then secure by tightening the finial (1).
9. Remove the plug cover and plug the power cord into a polarized 120 volt outlet.
10. Use the rotary switch (6) to turn the lamp ON/OFF.
RE-LAMPING INSTRUCTIONS:
1. Unplug the fixture from the wall outlet.
2. Make sure the lamp body and the bulb(s) is cool enough before touching.
3. Remove the old bulb from socket and insert new bulb into the socket.

ASSEMBLY DIAGRAM:

This manual is suitable for uses with floor lamp and table lamp. The fixture shape may
vary, not shown for all models but the same assembly methods as diagrams.
Part# Description
1 Finial
2 Fabric shade
3 Harp
4 Bulb
5 Socket
6 Rotary Switch
"U" Support shelf
7
8 Coupler
9 Threaded Tube
10 Connector / Base
1
2
3
4
5
6
7
8
9
9
10
3
1
2
3
4
5
6
7
8
9
10