Publicidad
Idiomas disponibles
Idiomas disponibles
Thank you for purchasing this Hampton Bay interior portable luminaire. This
product has been manufactured to the highest standards of safety and quality.
The durable finish and hard back shade design provide for care-free
maintenance. Simply wipe with a clean towel to keep looking showroom new.
FEATURES:
1. Durable easy to maintain finish; simply wipe with a clean soft cloth to
keep looking new.
2. Three-way rotary switch provides just the right amount of light where it is
needed.
3. Popular E27 lamp holder may be fitted with a CFL equivalent energy-
saving bulb.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service
Team at 1-877-527-0313 or visit www.homedepot.com. Please reference your
SKU 857-394 Rhodes Bronze Table Lamp when speaking to a Customer
Service agent.
CAUTION:
1. Before starting to assemble your portable luminaire, spread all parts out on
a clean flat surface. Inspect each part for defects that may have occurred
during shipping.
Important: Inspect the wire insulation for any cuts, abrasions or exposed
copper that may have resulted during shipping. If there is a defect in the wire,
DO NOT continue the assembly operation. Please call our Customer Service
Team at 1-877-527-0313.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS.
3. Keep your receipt and these Instructions for Proof of Purchase.
TOOLS REQUIRED FOR ASSEMBLY:
1 ea—150-watt maximum 3-way type
A bulb (or CFL equivalent)
(not included)
Page 2
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 ea – Finial (A)
1 ea – Shade (B)
1 ea – Socket
1 ea - Body (E)
Assembly (D)
ASSEMBLY INSTRUCTIONS:
1. Screw Socket Assembly (D) clockwise
into Body (E) until secure; pull any
excess cord through Body (E).
2. Screw Body (E) clockwise into Base
(F) until secure; pull any excess cord
through Base (F).
3. Install Harp (C) to the Under Harp of
Socket Assembly (D).
4. Install a 150-watt maximum Type A
(or CFL equivalent) bulb into Socket
Assembly (D).
5. Install Shade (B) over Harp (C); secure
by screwing Finial (A) clockwise to
Harp (C).
Page 3
1 ea—Harp (C)
1 ea—Base (F)
A
B
C
D
E
F
Publicidad
