Assembly
1
Assembling the light fixture
□
Spread the arms (see Fig.1) so that the arms are at an equal distance from each other (see Fig. 2).
□
Thread the tube (C) onto the nipple (K) until tight.
□
Thread the nut (D) onto the nipple (E) and thread the nipple (E) into the coupling (I).
□
Install two 75-Watt max, type A bulbs (not provided) into the sockets on the fixture body. Do not exceed the
maximum wattage capacity recommended on the socket (J). We recommend the use of a clear light bulb.
□
Slide the glass shade (F) and the cap (G) onto the nipple (E) then secure with the finial (H).
5
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM