Adjust Calf Support - Nuna tavo Manual De Instrucciones

Make sure the recline is adjusted properly for use.

Adjust Calf Support

1 The calf support has 3 positions.
2 To raise the calf support, push it upwards.
3 To lower the calf support, press in both buttons on the sides and rotate the
calf support downward.
4 Adjust the calf support to vertical position when the recline is flat.
Pull the fabric out from under the calf support and attach it to the stroller
using the 4 snaps. This extra flap must be used when the stroller is in full
(28)
recline.
Child may slip into leg openings and strangle. Never use in the reclined
position unless the extra flap is pulled out from under the calf support,
snapped into place and is secure.
Do not use enclosure with an older child that can lift up on hands and
knees or crawl out.
Remove the armbar when the calf support is in the vertical position and
the extra flap is snapped into place.
Front Swivel Locks
1 Pull up the front swivel locks to maintain the moving direction.
2 It is recommended to use swivel locks on uneven surfaces.
Brake
1 To lock wheels, step on the back of the brake lever and push downwards.
(30)
2 To release wheels, step on the front of brake lever and push
(31)
downwards.
(27)
(29)
16