Fault
CD is not
played.
No function
70
Possible cause
Condensation has formed.
Incorrect CD format.
The CD is dirty or incorrectly
inserted.
The mains plug is not inserted
correctly.
The device is disrupted by a
thunderstorm, static charge
or another external factor.
Corrective action
Pull the mains plug out of
the mains outlet and wait un-
til the device and the CD has
adapted to the environmental
conditions.
The device only supports the
CD formats specified in the
technical data.
Clean the CD and insert it into
the CD compartment with the
label facing upwards.
Check if the mains plug is in-
serted in the outlet correctly.
Pull the mains plug out of
the outlet and then plug it in
again.