Ice Service; Ice Trays - GE GPE12 Manual Del Propietario E Instrucciones De Instalación

Ice Service

Ice Trays

Ice maker Accessory Kit
An ice maker accessory kit is available from your dealer.
refrigerator. To order, go to GEApplianceparts.com or
NOTE:
the lowest position when the ice maker is installed.
The water valve cover assembly that came with the
Owner's Manual must be installed when installing the
optional ice maker kit. Please call 1-800-432-2737
and order part WR13X20070 if the water valve cover
Water Supply Kits
instructions needed to connect the ice maker to your
cold water line are available at extra cost from your
6
To make ice, fill the ice tray with water and set it on a
form in a few hours.
To release ice cubes, turn the tray upside down, hold it
over a container and twist both ends.
up, twist both ends slightly and remove as many cubes
as you want.
Wash ice trays in lukewarm water only—
do not put them in an automatic dishwasher.
WARNING
Connect to potable water supply only.
A cold water supply is required for automatic
icemaker operation. The water pressure must be
between 40 and 120 psi (275-827 kilopascals)
49-60749-2