zarges Z600 Instrucciones De Montaje Y Uso página 17

If you need further information, or in case of special re-
quirements not adequately described in these Assembly
and Use Instructions, please contact the manufacturer
directly (see Section 1.2).
We also would like to point out that the contents of these
Assembly and Use Instructions are not part of an earlier
agreement, promise or a legally binding relation and that
they are not supposed to change any of these. All obliga-
tions arise from the pertinent sales contract, which also
contains the complete and only valid Conditions of War-
ranty (also see Section 1.4). These contractual warranty
conditions are neither expanded nor restricted by the un-
derlying Assembly and Use Instructions.
The transmission and reproduction of this document, as
well as the utilisation and disclosure of its contents, are
allowed only with the express approval of the manufac-
turer. Any violations of the aforementioned statements
will require payment of damages.
Table of Contents
1 General .........................................................18
1.1 Introduction ..................................................... 18
1.2 Manufacturer................................................... 18
1.3 Test of work safety .......................................... 18
1.4 Duties, liability and warranty .......................... 18
1.5 Date of issue.................................................... 18
1.6 Copyright ......................................................... 19
2 Safety rules ..................................................19
2.1 Basic safety precautions ................................. 19
2.2 Safety symbols ................................................ 19
2.3 Proper use according to manufacturer
instructions ..................................................... 19
2.4 Unapproved use............................................... 19
2.5 Special safety provisions................................. 19
2.5.1 Behaviour while working with electrical
equipment on the systems.............................. 19
2.5.2 Conduct when working on electrical
installations from the systems ....................... 19
3 Packaging and transportation.......................19
4 Description of system ...................................20
4.1 Specifications .................................................. 20
4.2 Indentification of the systems ......................... 20
4.3 Equipment ....................................................... 21
4.3.1 Basic equipment.............................................. 21
4.3.2 Accessories ..................................................... 21
5 Assembly of the systems ..............................21
5.1 Safety rules ..................................................... 21
5.2 Assembly ......................................................... 22
5.2.1 Assembly of industrial access steps
with guard rail ................................................. 22
5.2.2 Assembly of platform steps with guard
rail and supporting shank ............................... 22
5.2.3 Assembly of stationary bridging steps ........... 23
o
N 291311
5.2.4 Assembly of working platforms, module
system ..............................................................23
5.2.5 Assembly of stairway .......................................23
5.2.6 Assembly of supporting shank ........................24
5.2.7 Assembly of standard step guard rail .............24
5.2.8 Assembly of plug-in step guard rail ...............24
5.2.9 Assembly of platform guard rail, lateral,
standard ..........................................................24
5.2.10 Assembly of platform guard rail, lateral,
plug-in .............................................................25
5.2.11 Assembly of platform guard rails, front,
standard ...........................................................25
5.2.12 Assembly of platform guard rail, front,
plug-in .............................................................25
5.2.13 Assembly of footboard and angle
installation of standard platform
guard rails........................................................25
5.2.14 Assembly of hooks ...........................................25
5.2.15 Assembly of supports ......................................25
5.2.16 Assembly of ground bracket............................26
5.2.17 Assembly of snap-in console...........................26
5.2.18 Assembly of triangular bracket .......................26
5.2.19 Assembly of double barrier .............................26
5.2.20 Assembly of hinged door .................................26
5.2.21 Assembly of locking chain ...............................27
5.2.22 Installation of connecting elements and
diagonal strut...................................................27
6 Using the systems.........................................27
6.1 Safety rules ......................................................27
7 Maintenance .................................................27
7.1 Cleaning the system ........................................27
7.2 Repair jobs on the systems .............................28
7.3 Spare parts ......................................................28
8 Storage .........................................................28
9 Inspections ...................................................28
9.1 Inspection stickers...........................................28
- 17 -
GB