Selecting A Location - STACK-ON SHD-SU-BG-E Manual De Instrucciones

SELECTING A LOCATION

The safe must be mounted to the floor. For
optimal safety and security, the safe should
be installed adjacent to a side wall with
minimal space on either side of the safe, in an
isolated, dry and secure area.
The safe should be flat against the wall and
floor. Remove the baseboard if necessary.
CHILDREN SHOULD NOT PLAY WITH OR
AROUND THE SAFE AT ANY TIME.
SECURING THE SAFE
NOTE: The safe must be secured to the floor.
Use the hardware provided or consult your
hardware retailer for fastening hardware for your
particular mounting surface.
NOTE: This safe must be mounted to the floor.
Failure to do so will compromise the safety and
security of the safe.
Mark the holes to be used. Drill the appropriate
diameter and depth of pilot holes depending on the
type of hardware being used and the type of
mounting surface.
Secure the safe with the fasteners.
5
16
40718-1704