31
360°
5.2
2
Positioning of the canopy
inclination
1. Turn the crank until the desired
3
Turning the parasol
1. Open the fixing lever at the base tube
2. Turn the sunshade to the requested
3. Tighten the fixing lever again
4
Closing the parasol
To close the sunshade, the canopy
needs to be in a horizontal position.
1. Turn the hand crank until the sunshade
2. Push in the unlock button
3. Pull the bracket back
5
Bind/protect the parasol
1. Pull out / wrap fabric segments
2. Secure the parasol with a binding strap
3. Lift the protective cover above the
5.3
4. Close the protective cover
!
Position the rod on the side of the
parasol.
inclination is reached
clamp
position
is closed
parasol section