Broan EVOLUTION QP4 Serie Instrucciones página 3

10-MINUTE DELAY OFF
When your hood fan is on (any speed) press the
activate the delay off feature. When activated, the hood fan will
automatically turn off after 10-minutes has elapsed. The delay
feature is active when the following appear on the LED screen: A
green indicator illuminated above the delay
countdown "10-0" , and a clockwise rotating LED. The delay
button can be pressed once again, to stop the delay countdown.
Pressing the button again will resume the delay countdown.
Pressing and holding the button will turn off the feature.
TIMER
Press the button to activate the timer setting feature. Use
the and buttons to reduce or advance the timer setting to
the desired duration. When the desired timer setting is reached,
allow 3 seconds without pressing any additional button or press
the button once again. The timer will then activate, and
the countdown will be displayed on the LED screen along with
an green indicator above the
reached "0:00" , an audible beep will be heard. The beep will
continue until the timer button
timer countdown can be stopped at any time by pressing the
once again. Pressing the
the timer countdown. Pressing and holding the
turn off the feature. Note that when both the timer and delay off
features are active together, the timer function will be illuminated
on the LED display, and the delay off countdown will be active,
but not displayed.
FEATURE MENU
Your hood offers many settings that can be accessed and
adjusted by scrolling through the feature menu. Your hood fan
must be off to be able to activate and access the feature menu.
Pressing the button when the hood fan is off will activate the
feature menu. Pressing the
menu is active will scroll through the various features that can
be adjusted/set. When the feature menu is active, if a button is
not pressed within 10 seconds or after scrolling through all menu
settings, the feature menu will automatically be exited, and all
selected settings will be saved. A green indicator above the
icon will illuminate when the feature menu is active. The following
features can be adjusted sequentially:
button to
button, a numeric
button. After the timer has
is pressed once again. The
button again will resume
button will
button again when the feature
MODELS QP430SS • QP436SS • QP442SS
A
TO SET CLOCK:
Push (B) once – Hours will flash
Push (A) to decrease hours, Push (C) to increase hours.
Push (B) 2nd time – Minutes will flash
Push (A) to decrease minutes, Push (C) to increase minutes.
TO TURN DISPLAY ON & OFF:
(default from factory - display ON)
Push (B) 3 times: -d- will be seen
Push (C) once: (don) seen = display on (normal setting)
Push (C) 2nd time: (doff) seen = display off (no clock will be
seen)
TO TURN SLEEP MODE ON & OFF:
(default from factory - OFF)
Push (B) 4 times: -S- will be seen
Push (C) once: (SOFF) seen = All hood functions work
Push (C) 2nd time: (SON) seen = only fan and light buttons
work – display, ambient lights, delay off or timer will not
function.
TO TURN AMBIENT LIGHT SENSOR ON & OFF:
(default from factory - OFF)
Push (B) 5 times: -A- will be seen
Push (C) once: (AON1) seen = night-lights on when room very
dark.
Push (C) 2nd time: (AON2) seen = night-lights on when room is
less dark.
Push (C) 3rd time: (AOFF) seen = night-lights no longer come
on automatically.
Note that the feature menu can be exited any time by not press-
ing any button(s) for 10 seconds or by scrolling through the entire
feature menu.
Page 3
B C