Disposal /Enviromental Protection; Replacement Parts/Accessories; Technical Specifications - Grizzly ERM 1231-2 G Traducción Del Manual De Instrucciones Original

Disposal /Enviromental
Protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center. Be environ-
mentally friendly. Return the tool, acces-
sories and packaging to a recycling
when you have finished with them.
Machines do not belong with do-
mestic waste.
The plastic and metal parts employed can
be separated out and thus recycled use
can be implemented. Ask our Service-
Center for details.
Defective units returned to us will be dis-
posed of for free.
Replacement parts/
Accessories
Spare parts and accessories
can be obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre (see "Grizzly
Service-Center"). Please have the order
number mentioned below ready.
Spare blade .............................. 13700207
Grass box ................................. 91095797

Technical Specifications

Electric Lawnmower ....... ERM 1231-2 G
Motor input power ......................... 1200 W
Mains voltage ........ 220-240 V~, 50/60 Hz
Idling speed ..............................3350 min
Blade width .................................. 310 mm
Cut height ........................ 20 / 40 / 60 mm
centre Protection class ...................................
Protection type.................................. IP 24
Weight (without connection cable) ...7.7 kg
Lawn box volume.................................27 l
Sound pressure specification
(L ) ........................84 dB(A), K
pA
Noise level specification
guaranteed
measured
Vibration (a
The noise and vibration values have
been determined in accordance with the
standards and regulations specified in the
declaration of conformity.
Technical and visual modifications may
be made without notice in the course
of further development. All dimensions,
information and specifications in these
operating instructions are therefore not
guaranteed. As such, no assertion of legal
claims can be enforced on the basis of the
operating instructions.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
(L )
WA
.............................. 96 dB(A)
.............. 93 dB(A), K
) ................................ 1.3 m/s
h
GB
-1
II
= 3 dB
pA
= 3 dB
WA
2
53