Linksys EtherFast Manual Del Usuario página 12

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
D. Check Never Dial Up a Connection.
E. Click the Apply button.
F. Click the OK button.
The following only applies when the WPC11 is installed in the Router:
6. I get no signal strength or link quality or signal strength, what can I do?
A. Verify that the Router's WLAN LED is illuminated.
B. Verify that all of your wireless PCs are using "Infrastructure" mode.
7. How can I improve the Router's range?
A. Verify that the Router is as high off of the ground as possible.
B. Verify that there are no large sources of electrical interference nearby. (For
example: speakers breaker boxes, florescent lights, microwaves, etc.)
C. Change the wireless channel being used. To do this:
-
Open your web browser and type http://192.168.1.1 into the "Address" field.
-
In the "Enter Network Password" box, leave the "User Name" field blank and
type admin as the password. Then, click OK.
-
From the Setup tab, change the channel to 1.
-
Click the Apply button followed by the Continue button to save the settings.
-
Continue doing this until you find the channel that provides the best range.
20
Instant Broadband™ Series
21

Publicidad

Tabla de contenido
loading

Tabla de contenido