Transporting, Storage And Disposal; Transporting; Storage; Disposal - WEG VBWC Serie Instrucciones De Instalación

4 TRANSPORTING, STORAGE AND DISPOSAL

4.1 TRANSPORTING

WARNING!
1. Do not move the circuit breaker by handling main circuit bus terminals.
Otherwise, there is the danger of electric accidents by temperature increasing.
1. Please use hook and rope to lift or transport the circuit breaker. The hook should be put into the designated
hole or position.
2. Before inserting circuit breaker into the electrical panel, please remove the lifting hooks.
3. When placing the circuit breaker on the ground, be careful not to drop or to impact the breaker.

4.2 STORAGE

CAUTION!
1. The circuit breakers must be stored in clean, dry, dust and condensation- free environment.
Otherwise, may cause a weakness of insulation.
2. The products must be stored at the place with no corrosive gas.
Otherwise, there is the danger of a product damage (discoloration, temperature rise or burns on contacts due to the
increased contact resistance).

4.3 DISPOSAL

CAUTION!
1. When making a disposal, dispose it at a designated place with no affection to environment.
Otherwise, may cause an environmental pollution.
1. According to the ISO 14000, separate all of them as metallic or non-metallic material and dispose them at a
designated place after dividing all of material as renewable materials and other materials which may cause an
environmental pollution.
2. In case of being materials whatever you want to remake please contact us.
3. In case of special materials making noxious gas when destroying by fire, be sure to dispose them at an
approved place.
Figure 4.1: Circuit Breaker
www.weg.net
Vacuum Circuit Breaker | 9