Receipt Inspection; Storage - WEG ABW Serie Manual De Instrucciones

www.weg.net

1.8. reCeIpt InSpeCtIon

Immediately after receiving the product, check that its packaging is in a perfect
state.Upon unpackaging it, execute a visual inspection of the circuit breaker,
even before removing it from the pallet. If there is any sign of damage or flaws
caused by the transportation,inform the carrier and WEG directly. Also check that
the information appearing on the product identification labels matches the item
acquired.

1.9. StorAge

If it is necessary to store the circuit breaker before installing it, maintain it in its
original packaging, in a covered, clean, dry, ventilated and heated place to avoid
condensation.Maintain the circuit breaker in the OFF position, with the springs
unloaded. For Draw-out circuit breakers, maintain it in the TEST position.
When it is no longer in its original packaging, protect it from the dust or humidity
covering it with a plastic film or covering. Do not store the circuit breaker in an
uncovered place or exposed to bad weather.
1.9.1. Maximum stacking
≤3
ABW06~40(3P)
≤2
ABW40(4P)
1
ABW50~63
ABW - Air Circuit Breaker 17