Faucet Installation - Delta 100LF-WF Guia De Inicio Rapido

Deck Mount
3
2
2
1
Deck Mount
2
1
2

Faucet Installation

For deck mount models.
Feed tube(s) (1) down through
center hole in sink. OPTION: If sink
is uneven, use silicone sealant under
the gasket. Secure faucet to sink with
mounting nuts (2) supplied with
your faucet.
Deck Mount
2
1
Single Hole Mount
1
2
For single hole mount models.
Feed tubes (1) down through remaining
hole in sink. OPTION: If sink is uneven,
use silicone sealant under the gasket.
Secure faucet to sink with mounting brack-
et, spacer (for thin mount only) and nut (2)
supplied with your faucet.
6
4
1/2" (12.70mm) IPS
3
1
2
Important: Use two wrenches when
tightening. Do not over tighten.
1/2" (12.70mm) IPS
1 2
3
Supply Line Connections
For models with fittings.
Note: Be careful when bending the
copper tubing. Kinked tubes will void
the warranty. Choose hook-ups for 1/2"
I.P.S. connections: (1) Ball nose riser (3/8"
O.D. copper tubing), or (2) 1/2" I.P.S. fau-
cet connector. Use the enclosed coupling
nuts (3) with the ball nose risers (1).
5
2
1
3
Flush the System and
Check for Leaks
Remove aerator (1) and turn faucet
handle (2) to the full on mixed position.
Turn on hot and cold water supplies (3)
and flush water lines for one minute.
Important: This flushes away any
debris that could cause damage to
internal parts.
Check all connections at arrows for
leaks. Re-tighten if necessary, but do
not overtighten.
7