Product Specifications - GYS POWERDUCTION 10R Manual De Instrucciones

Translation of the original instructions
RECOMMENDATIONS
• When heating the coils for the first time, some smoke will be released.
• Avoid heating for more than 30s, the coils will heat excessively and suffer premature damages.
• It is not necessary to come in contact with the bolt to heat it.
• The coil's protective fabric is fragile, it is glass fabric : make sure to store the coils in such a way that they do not
get damaged.
The coils heat very fast. After use, is is recommended to let them cool down before storing them. Ma-
nipulate with gloves to prevent burns or itches caused by the glass fabric.
Do not place a finger or any limb inside or close to the coil when the machine is switched on. Magnetic
fields should be considered.

PRODUCT SPECIFICATIONS

Power
Operating voltage
Power supply frequency
Heater Frequency
Number of conductors
Power supply cable length
Inductor cable length
IP Code
Weight (kg)
générateur + inducteur
Weight (kg)
inducteur seul
Dimensions (cm)
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
• Removable inductors and ferrites that are consumables.
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
POWERDUCTION 10R
10R
1250 W
230 V +/- 15%
50 Hz - 60 Hz
45-100 kHz, microprocessor controlled.
2 + Earth
2 m
0,9 m
IP 21
3,5
3,4
25 x 20 x 14,5
EN
13