Smoke hollow DG1100S Manual Del Usuario página 15

17
Hardware Needed:
(4) 1/4-20x5/8" Screws
Screws are preassembled with handles.
18
19
Hardware Needed:
(2) 1/4-20x5/8" Screws
(2) 1/4-20 Nuts
ENSAMBLAJE
ASSEMBLY,
Remove screws from gas grill lid handle and charcoal
23
24
grill lid handle. Attach handles to Lids as shown.
25
Remove washer and wingnut
Insert through the lid holes as
shown and reapply washers
26
STEP 17:
STEP 18:
from both heat indicators.
and wingnuts.
STEP 19:
Unscrew cap from smoke
stack then insert through
the hole on the inside
of the Charcoal Grill Lid.
Attach as shown with (2)
screws and (2) nuts.
15