Silverline 253162 Manual Del Usuario página 9

Lubrication
• Occasionally apply a small amount of a suitable spray lubricant, to the gate mechanism.
Afterwards, perform a thorough inspection as described in 'Inspection procedure'
Transport
• ALWAYS transport this equipment inside a dedicated bag or suitable container that protects it
from mechanical damage and shields the equipment from high temperatures, humidity, UV
rays and chemicals
Storage
• Store this tool carefully in a secure, dry place out of the reach of children
• Store at moderate temperature and humidity, away from direct sunlight or chemicals, inside a
dedicated, UV-proof bag or container
• Never place heavy objects on top of this equipment
Disposal
Service life and product obsolescence
WARNING: Fall arrest equipment is designed to arrest a fall from height ONLY ONCE! If
subjected to an arrested fall, the equipment must be withdrawn from service and rendered
unusable.
Note: The date on which the product is removed from the original packaging for the first time
becomes the 'date of first use' , which should be recorded on the Inspection Record (see end of this
manual). The specified working life begins from this point.
• This equipment is subject to a maximum working life of 5 years from the recorded date of
first use, provided the product has been correctly stored, maintained and subjected to regular
inspections by a trained and competent person
• New equipment may be stored for a maximum of 5 years from the date of manufacturing as
indicated on the product, and will still give the potential 5-year working life - provided it remains
in the original manufacturer's packaging
Note: Other reasons why the product may be considered obsolete include but are not limited to
changes of applicable standard, regulations or legislation, development of new techniques or
incompatibility with other equipment.
WARNING: Remove fall arrest equipment from service if:
• it has been used to arrest a fall
• any damage is present
• identification is not evident (permanent markings are not legible or have been damaged/
removed)
• it exceeds its specified service life
• if its full service history is unknown
• you have any doubt as to its integrity
Contact
Legal Manufacturer: Toolstream Ltd
For Declaration of Conformity please visit www.silverlinetools.com
For technical or repair service advice, please contact the helpline on (+44) 1935 382 222
Web: silverlinetools.com/en-GB/Support
Address:
Toolstream Ltd.
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
Notified body:
CCQS UK Ltd
5 Harbour Exchange
London
E14 9GE, United Kingdom
Notified body number:
1105
WARNING: If the product is re-sold outside the original country of destination, it is essential
the reseller shall provide instructions for use, periodic examination, maintenance and repair in the
language of the country in which the product is to be used.
Energy Absorbing Lanyard
silverlinetools.com
9