Care And Maintenance - Utilitech Pro MXL2005-LED1X10K840 Información De Seguridad

INSTALLATION INSTRUCTIONS
7. Remove the heat shrink tubing wrap from the ends of
the black, white, and green wires in order to expose
the copper wires prior to connecting to the building
supply lines.
8.Connect the fixture wires to the supply wires --
black to black, white to white, and green to
copper/bare. WARNING: If there is no ground supply
wire, stop installation and consult a qualified
electrician.
Once wire connections are made, secure each with a
wire nut (CC).
Hardware Used
Wire Nut x 3
CC
9.Re-connect the connectors between the fixture plate
(A) and fixture lens cover (B).
7
A
8
A
CC
9
B
A
Re-connect connectors
Lowes.com
6
INSTALLATION INSTRUCTIONS
10. Snap the fixture lens cover (B) back onto the fixture
plate (A) to complete the installation.
11. OPTIONAL: If linking two or more fixtures together,
power to each subsequent fixture can be made by
using the linking connector (DD) where only the first
fixture needs to be electrically hardwired and all linked
fixtures only need to be mechanically secured to the
mounting surface. CAUTION: The maximum number
of fixtures allowed to be linked together is indicated in
the following table below.
Hardware Used
DD Linking Connector x 1
ITEM # MODEL #
MXL2005-LED1X10K840
Item # 595682
MXL2005-LED1X20K840
Item # 595683
MXL2005-LED2X10K840
Item # 595684
MXL2005-LED2X20K840
Item # 595685

CARE AND MAINTENANCE

Clean with a mild, non-abrasive glass cleaner and soft cloth. Do NOT use solvents or
cleaners containing abrasive agents. When cleaning the fixture, make sure the power is
turned off, and any liquid spray should be applied to the cleaning cloth and not sprayed
directly onto the fixture itself.
10
B
11
DD
MAXIMUM NUMBER OF LINKED FIXTURES
Connect up to 30 fixtures.
Connect up to 15 fixtures.
Connect up to 15 fixtures.
Connect up to 7 fixtures.
Lowes.com
7
A