Control Panel - Hamilton Beach 78213 Manual Del Usuario

Control Panel

Power Light: The Power Light will turn green when the
Vacuum Sealer is plugged into an outlet and turns red while in
use.
Normal/Extended Seal Switch: Slide switch to Normal Seal to
vacuum-seal dry ingredients. Slide switch to Extended Seal to
vacuum-seal thicker bags or foods with moisture.
Vacuum & Seal Button: Press this button to start the vacuum
pump and activate the Seal Bar heating element.
Seal Only Button: Press this button to seal bags without
vacuuming air out of them, when making bags from rolls or
press to stop vacuuming and seal.
Vacuum Only/Accessory Button: Use with any external
accessories.
Cancel Button: Press this button to stop the vacuum/seal
process at any time in the cycle.
Before You Start Vacuum-Sealing
A vacuum bag is sealed when the two layers of the bag are heated from the Heat-Seal Bar causing the bag to be permanently sealed.
NOTICE: THIS VACUUM SEALER IS INTENDED TO BE USED ONLY WITH HEAT-SEAL VACUUM BAGS, WHICH HAVE AT LEAST
ONE SIDE THAT IS TEXTURED FOR AIRFLOW. FOR BEST RESULTS, AND TO AVOID DAMAGING THE VACUUM SEALER, USE ONLY
HEAT-SEAL VACUUM BAGS. DO NOT USE HOUSEHOLD PLASTIC BAGS.
Power Light
5