Seca 757 Manual De Instrucciones Y Garantía página 70

70 •
5. Select the "Lrn" (learn) menu item from the "rF"
submenu.
6. Confirm the selection.
The wireless group currently set (here: wireless
group 0 "Id 0") is displayed.
If wireless group "0" already exists and you wish to
set up another wireless group with this device, use
the arrow key to select a different ID (here: wireless
group 1 "Id 1").
7. Confirm your selection for the wireless group.
The device suggests a channel number for channel
1 (here: "C1 0").
You can either accept the channel number sug-
gested or select another channel number using the
arrow key.
8. Confirm your selection for channel 1.
The device suggests a channel number for channel
2 (here: "C230").
You can either accept the channel number sug-
gested or select another channel number using the
arrow key.
NOTE
Two-digit channel numbers are displayed with-
out a space. The display "C230" means: chan-
nel "2", channel number "30".
9. Confirm your selection for channel 2.
The device suggests a channel number for channel
3 (here: "C360").
You can either accept the channel number sug-
gested or select another channel number using the
arrow key.
10. Confirm your selection for channel 3.
The "StOP" message appears in the display.
The device is waiting for signals from other devices
with wireless transmission capability within range.
NOTE
With certain devices, a special switch-on proce-
dure must be followed if they are to be inte-
grated in a wireless group. Follow the
instructions for use for each device.