Activating Automatic Transmission (Asend); Selecting Print Option (Aprt) - Seca 757 Manual De Instrucciones Y Garantía

Activating automatic
transmission (ASend)
Selecting print option
11. Switch on the device you wish to integrate in the
wireless group, e.g. a wireless printer.
A beep can be heard when the wireless printer is
detected.
NOTE
As soon as you have integrated a wireless
printer in the wireless group, you must then
select a print option (menu\rF\APrt) and set the
time (menu\rF\tiME).
12. Repeat step 11. for all devices you wish to integrate
in this wireless group.
13. Press the Enter key to end the search.
14. Press the arrow key to see which devices have
been detected (here: "MO 3" for a wireless printer).
Once you have integrated several devices in the
wireless group, press the arrow key several times to
ensure that all devices have been detected by the
scale.
15. Press the Enter key to exit the menu or wait until
you exit the menu automatically.
You can configure the device so that the measured
results are automatically transmitted to all receive-
ready receivers registered to the same wireless group
(e.g.: wireless printer, PC with USB wireless adapter).
NOTE
If you are using a wireless printer, ensure that
the print option is not switched to "Off" ("Select-
ing print option (APrt)" on page 71).
1. Switch on the device.
2. Select the "ASEnd" menu item from submenu "rF"
and confirm your selection.
3. Select the setting "On" and confirm your selection.
You exit the menu automatically.
You can configure the device so that measured results
are automatically printed out by a wireless printer regis-
(APrt)
tered to the wireless group.
NOTE
This function is only accessible if the "Learn"
function has been used to integrate a
seca wireless printer in the wireless group.
1. Switch on the device.
The seca 360° wireless network • 71
English