Denver DAB-36 Manual De Instrucciones página 4

Ocultar thumbs Ver también para DAB-36:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
To receive the desired DAB station, press and hold the PRESET button, "Preset Empty X" (X
is the current program number) will appear on the display, the current program number
"X" is flashing on the display
Tune the TUNE/SELECT knob to choose your desired program number (1-10) you want
stored to. Then press TUNE/SELECT knob to store it.
Repeat the same procedures until all the desired radio stations were stored into the
program list.
Recall the memory, press PRESET button and tune the TUNE/SELECT knob to select the
stored radio station as desired. Press the TUNE/SELECT knob to confirm.
Please note: You may also recall the memory of Preset 1, Preset 2 and Preset 3 stations by
simply press the 1, 2, 3 knob on the unit.
IN FM MODE
Press the DAB/FM/AUX/BT button to select FM radio mode, press the SCAN button, when
a radio is found, the frequency on display will stop running and start playback
automatically.
If reception is no good, tune the TUNE/SELECT knob to fine tune. FM radio presetting is
same as DAB radio presetting
INFO Button
A.
The UNIT has DAB information modes which are shown on the bottom line of
the
display. Short press the INFO key to see the available types.
1.
Program type
Displays the type of station content being broadcast e.g. Classic, Pop, News, etc.
2.
Ensemble Freq.
Displays the DAB station frequency such as 13F 239.200MHz.
ENG
5
3.
Audio Bit Rate
Displays the data rate in kilo Bits per second and the audio mode e.g.Stereo.
4.
Ensemble name
Displays the name of the multiplex to which the Digital1 Network current station
belongs.
5.
Signal strength
Displays the signal strength for the station being listened to.
6.
Time/Date
Displays current time and date, received off-air.
7.
DLS (Dynamic Link Segment)
Scrolling text which includes messages such as Artist and track name, phone
numbers,
program details, etc.
B.
The UNIT has six FM information modes which are shown on the bottom line of
the
display. Short press the INFO/SETUP button to see the available types.
1.
PTY (program type)
Displays the type of station content being broadcast e.g. Classic, Pop, News, etc.
2.
Signal strength
Displays the signal strength for the station being listened to.
3.
Time and Date
Displays current time and date, received off-air.
4.
Station frequency
Displays the frequency of the station being listened to.
ENG
6

Publicidad

Tabla de contenido
loading

Tabla de contenido