Troubleshooting; Replacing Components; Cleaning The Interior; Main Components - Salamander SDSM6E Instrucciones Para Instalación, Uso Y Mantenimiento

11 TROUBLESHOOTING

The appliance does not switch on
Possible causes:
• Faulty connection in power supply cable.
• Broken switch.
• Defective electronic control.
The mobile section does not move
Possible causes:
• Blockage in balance wheel channel;
• Broken movement mechanism.
The radiant heating element does not switch on
Possible causes:
• Defective heating element.

12 REPLACING COMPONENTS

Replacing the heating element
• Remove the top cover.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.

13 CLEANING THE INTERIOR

• Check the condition of the inside of the appliance.
• Remove any built-up dirt.

14 MAIN COMPONENTS

• Heating element
• Panstand grid
• Control module
• User interface board
8