Conceptronic C300APRA2 Guía De Instalación Rápida página 41

The C300APRA2 will activate WPA security in your wireless network and accept the wireless connection of
your wireless WPS client with the entered PIN code.
Note: The C300APRA2 will keep the WPS authentication active for 120 seconds. If there is no connection
within these 120 seconds, the WPS authentication process will be stopped.
If the WPS feature has not been used before, the wireless network will still be unencrypted.
If the authentication of the wireless client has succeeded, the WPS LED will burn steady blue for 5
seconds. After these 5 seconds, the LED will turn off.
H. Click on "Wireless" in the top menu of the web configuration to reload the wireless configuration
page. In the "WPS Settings" section, the WPS state and WPS progress are now set to
"Configured":
Your wireless client is now connected to the C300APRA2 and your network is secured with WPA
encryption.
You can add more wireless WPS clients without losing the connection to previous wireless WPS clients.
If you want to add more wireless clients using the WPS PIN code feature, repeat steps A to H.
ENGLISH
H
H
41