16.6 Safety information
Please observe the following safety notices, before you commence with cleaning the
device:
► The WK Cool-Touch must be cleaned at regular intervals and limescale should be
removed.
► Switch the device off prior to cleaning it and unplug the plug from the wall power outlet.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
► Do not immerse kettle, base or power cord in water.
16.7 Cleaning
Kettle
Rinse the kettle with a damp cloth.
Mesh
The mesh is located it the sprout of the kettle. Clean it with a toothbrush.
Base
The stainless steel surface of the base can be cleaned with a commercial stainless steel
cleaning agent.
Buttons
Clean the buttons with a damp cloth. Do not use cleaning agents.
16.8 Descaling
Depending on the hardness of water you should descale the device once every two
weeks.
Fill the kettle with water and a commercial descaler or give a sip of vinegar into the
water. Heat the mixture to 70 °C but do not boil it to prevent overcooking. Rinse the
kettle with fresh water after descaling.
► Regularly decalcifying your WK Cool-Touch will reduce the electricity used and prolong
the life of the device.
Attention
Please note
32