Tabla de contenido
Publicidad
WS-1X-HN
Vertical Shroud
Installation
Position the shroud mounting
bracket (140-904) on the wall
A
above the shower. Secure the
bracket to the wall with 1/4"
fasteners (wall anchors and
fasteners supplied by installer).
SHOWER
Horizontal Shroud
Installation
A
Using the horizontal shroud as a
B
guide, secure the slip ring to the
wall with 1/4" diameter fasteners.
Using the shroud as a template,
C
drill and tap #10-24 holes in the
slip ring with a .149 drill bit.
4
6-1/2"
(165mm)
"
4
(102mm)
Secure the brackets to the wall with
1/4" diameter fasteners (wall anchors
and fasteners supplied by installer).
11/30/2012
6-1/2"
(165mm)
Position the slip ring (186-1358)
3/4"
against the wall at the ceiling
B
(19mm)
and in line with the shroud
bracket. Secure the slip ring to
the wall with 1/4" fasteners.
"
3
(76mm)
6-5/8"
(168mm)
#10-24 SCREW
(160-138)
(4) PLACES
Bradley • 215-1441A Rev. D; ECN 12-03-14
Installation
Position the shroud and
secure with the fasteners
C
provided. Using the holes in
the top of the shroud as a
template, drill and tap #10-24
holes in the slip ring with a
.149 drill bit. Secure the
shroud to the slip ring.
CORNER LINE
Publicidad
Tabla de contenido
