Coleman 9944 Serie Instrucciones De Uso página 4

To Set Up
Step 1
■ Remove stove, legs and
regulator from packaging.
■ Regulator is packed in
the end of the Styrofoam
near front of stove.
■ Inspect all packing and
remove all parts.
■ Your unit includes:
(2) Side tables
(1) Stove
(1) Lid
(1) Waterpan
(1) Regulator
(1) Grill
(4) Legs
■ See replacement parts list for identification.
Step 2
■ Use a ground cloth
to protect the finish.
■ Place stove on back
and remove side tables.
■ Remove legs from
mounting brackets on
bottom of stove.
■ Thread legs into
receivers on bottom of
stove handles.
4
■ Stand stove up and adjust leg level-
ers if necessary.
Step 3
■ Place side table wire
fingers in holes on top of
stove handles and push
down on table until it
stops.
Step 4
■ Open Lid.
■ Remove packing from cooking surfaces, merchandising material from
inside lid, and any other combustible materials from inside the stove.
Fill Pan with Water
CAUTION
• Do not use the stove without the water pan in place.
• Coleman recommends water in the water pan when in use. This will
help prevent a grease flare-up.
■ Make sure pins in
WATER PAN match holes in
COOKTOP.
■ Cleanup will be improved
if you fill WATER PAN to
mark indicated (MAX).