Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
D.
Feed tubes down through hole in sink
D.
making sure that the gasket is properly
aligned in cavity of base. Install
mounting bracket (1) & nut (2).
Tighten with the provided wrench (3).
NOTE: The wrench provided is
designed to be used with a variety of
tools: flat/phillips head screwdrivers,
wrenches, etc.
3
1
2
3
A.
A.
1
4
Filtration Unit Installation
IMPORTANT: The filtration system
should be connected to the cold
water supply ONLY.
Decide on the placement of the
filtration unit and mark the positions
of the two mounting bracket holes (1).
Note: Place the unit in a location
easy to access such as the side
cabinet wall (30" recommended
distance from the faucet). If plastic
anchors are needed, drill two 1/4"
(6 mm) holes (2) and insert the
anchors (3). Install the bracket using
the enclosed two screws (4).
1-800-345-DELTA (3358)
www.deltafaucet.com
30"
(762 mm)
2
3
2.5"
(63.5 mm)
1
5
Publicidad
Tabla de contenido
