Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
A.
1
1
B.
Shut Off Water Supplies
Remove old faucet and place gasket (1)
A.
on new faucet.
Insert spray hose (1) down through
B.
support assembly on escutcheon and
hole in sink. From underneath the sink
place the mounting nut (2) over spray
hose and insert the hose up through the
middle hole in sink. From above the sink,
snap the quick connect spray hose (1)
onto the spray hose nipple (3) with quick
connect fitting. Pull down moderately to
ensure connection has been made.
NOTE: Thick tile 2 1/2" mounting kits
available - RP30393.
3
2
C.
2
1
Feed tubes (1) down through center
C.
hole in sink. Secure faucet to sink
with nut & washer (2) and mounting
nut (3) supplied with your faucet.
OPTION: If sink is uneven, use
silicone sealant under the gasket.
1-800-345-DELTA (3358)
1
3
www.deltafaucet.com
3
Publicidad
Tabla de contenido
