Blackmagic Design Duplicator 4K Manual De Instalación Y Funcionamiento página 107

Asynchronous slot information change notification is disabled by default and may be configured with the
"notify" command. When enabled, changes in slot state will generate a "502 slot info:" asynchronous message
with the same parameters as the "202 slot info:" message.
Retrieving transport information
The "transport info" command returns the state of the transport:
transport info
The server responds with transport specific information:
208 transport info:
status: {"stopped","record"}
display timecode: {timecode}
timecode: {timecode}
The "timecode" value is the timecode within the current timeline for playback or the clip for record. The "display
timecode" is the timecode displayed on the front of the deck. The two timecodes will differ in some deck
modes.
Asynchronous transport information change notification is disabled by default and may be configured with the
"notify" command. When enabled, changes in transport state will generate a "508 transport info:" asynchronous
message with the same parameters as the "208 transport info:" message.
Video Formats
The following video formats are currently supported on Blackmagic Duplicator 4K:
SD
525i59.94 NTSC
625i50 PAL
HD
720p50
720p59.94
720p60
1080p23.98
1080p24
1080p25
1080p29.97
Ultra HD
2160p23.98
2160p24
2160p25
2160p29.97
Duplicator 4K supports progressive segmented frame modes, and automatically detects level A and level B
3G-SDI formats for 1080p50, 1080p59.94 and 1080p60.
File Formats
Duplicator 4K supports the following file formats:
H.264Low
H.264Medium
H.264High
H.265Low
H.265Medium
H.265High
↵
↵
↵
↵
↵
1080p30
1080i50
1080p50
1080i59.94
1080p59.94
1080i60
1080p60
2160p30
2160p50
2160p59.94
2160p60
Contrôle à distance via Ethernet 107