Blackmagic Design Duplicator 4K Manual De Instalación Y Funcionamiento página 14

To daisy chain multiple Blackmagic Duplicator 4Ks:
1
Connect the first unit's RS-422 'remote out' port to the second unit's 'remote in' port
using a common serial cable with DB-9 connectors. Serial cables with DB-9 connectors
are commonly available at your local computer or video equipment store.
2 Connect the 'loop' SDI output from the first unit to the second unit's SDI input.
It's really that easy! To daisy chain more Blackmagic Duplicator 4Ks, simply keep plugging each
'remote' and 'loop' output to the next unit's remote and SDI input all the way down the chain.
To daisy chain multiple Blackmagic Duplicator 4K's together, simply connect
the loop output from one unit to the SDI input of the next unit. Similarly, connect
the remote output from one unit to the remote input on the next.
20 21 22 23
14 15 16 17 18 19
Press the remote button on each slave unit in the chain
so they can be controlled remotely by the first unit.
NOTE
enable remote control. The 'remote' button will illuminate when enabled. Press again
to disable.
It's worth performing a test recording to make sure all the units are controlled by the master
unit before the final recording. If the slave units are not conforming to the master unit, check
the master unit has its remote button turned off and the slave units have their remote button
turned on.
REMOTE IN REMOTE OUT
REMOTE IN REMOTE OUT
REMOTE IN REMOTE OUT
REMOTE IN REMOTE OUT
REMOTE IN REMOTE OUT
REMOTE IN REMOTE OUT
REMOTE IN REMOTE OUT
REMOTE IN REMOTE OUT
REMOTE IN REMOTE OUT
24 25
20 21 22 23 24 25
Make sure you press the 'remote' button on each slave unit's control panel to
SD/HD/3G/6G/12G-SDI
IN LOOP OUT
ETHERNET OPTICAL OUT/IN
SD/HD/3G/6G/12G-SDI
IN LOOP OUT
ETHERNET OPTICAL OUT/IN
SD/HD/3G/6G/12G-SDI
IN LOOP OUT
ETHERNET OPTICAL OUT/IN
SD/HD/3G/6G/12G-SDI
IN LOOP OUT
ETHERNET OPTICAL OUT/IN
SD/HD/3G/6G/12G-SDI
IN LOOP OUT
ETHERNET OPTICAL OUT/IN
SD/HD/3G/6G/12G-SDI
IN LOOP OUT
ETHERNET OPTICAL OUT/IN
SD/HD/3G/6G/12G-SDI
IN LOOP OUT
ETHERNET OPTICAL OUT/IN
SD/HD/3G/6G/12G-SDI
IN LOOP OUT
ETHERNET OPTICAL OUT/IN
SD/HD/3G/6G/12G-SDI
IN LOOP OUT
ETHERNET OPTICAL OUT/IN
REM
LOCK
REM
LOCK MENU
Slave unit.
Turn on remote
so it follows the
preceding unit.
Slave unit.
Turn on remote
so it follows the
preceding unit.
Master unit.
Turn off remote and
press buttons on this unit
to control all the units.
MENU
Daisy Chaining Multiple Duplicators
www.blackmagicdesign.com
www.blackmagicdesign.com
www.blackmagicdesign.com
www.blackmagicdesign.com
www.blackmagicdesign.com
www.blackmagicdesign.com
www.blackmagicdesign.com
www.blackmagicdesign.com
www.blackmagicdesign.com
14