Blackmagic Hyperdeck以太网协议; Protocol Commands - Blackmagic Design Duplicator 4K Manual De Instalación Y Funcionamiento

Blackmagic HyperDeck 以太网协议
Blackmagic HyperDeck以太网协议是基于文本的协议， 最初编写是为了通过以太网端口控制
Blackmagic HyperDeck硬盘录机的， 但您还可以将相同的协议用于控制您的Blackmagic
Duplicator 4K。
由于复制机只进行记录， 不需要用到Hyperdeck协议的所有命令， 因此这部分显示了与复制机相关
的HyperDeck以太网协议中可用的命令。

Protocol Commands

Command
help or ?
remote
remote: enable: true
remote: enable: false
remote: override: true
remote: override: false
quit
ping
record
record: append: true
stop
commands
notify
notify: transport: true
notify: transport: false
notify: slot: true
notify: slot: false
notify: remote: true
notify: remote: false
notify: configuration: true
notify: configuration: false
notify: dropped frames: true
notify: dropped frames: false
device info
slot info: slot id: {slot ID}
transport info
configuration
configuration: record mode: Duplicate
Command Description
Provides help text with all commands and parameters.
Queries the state of HyperDeck's remote control mode.
Enables remote control.
Disables remote control.
Turns remote override on.
Turns remote override off.
Disconnects HyperDeck server.
Determines HyperDeck server is responding.
Starts recording.
Starts appended recording.
Stops playback or recording.
Lists all supported commands in an XML format.
Queries the current state of all notifications.
Enables transport notifications.
Disables transport notifications.
Enables slot notifications.
Disables slot notifications.
Enables remote notifications.
Disables remote notifications.
Enables configuration notifications.
Disables configuration notifications.
Enables dropped frames notifications.
Disables dropped frames notifications.
Provides device information.
Provides information about a specified slot.
Provides information for the state of the transport.
Queries the current configuration.
Configures the record mode to duplicate.
通过以太网远程控制
214