Descargar Imprimir esta página

Daisy Chaining - Blackmagic Design Duplicator 4K Manual De Instalación Y Funcionamiento

Ocultar thumbs Ver también para Duplicator 4K:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 151
Your Blackmagic Duplicator 4K supports 2 channels of embedded SDI audio, so you don't need
to plug in audio as it is already connected via the SDI video input.
TIP
You can monitor your source video's audio levels on the LCD home screen.

Daisy Chaining

You can daisy chain multiple Blackmagic Duplicator 4Ks so you can record on even more
SD cards. For example, if you wanted to duplicate 100 cards, then you just daisy chain
4 units together.
1
Connect the RS-422 'remote' output from the first Blackmagic Duplicator 4K to the
'remote' input on the second unit. Repeat this process for each unit in the chain.
2
Similarly, connect the loop SDI output from the first unit to the SDI input of the second
unit and repeat for each unit down the chain
3
On each unit's control panel there is a button marked REM. This is the 'remote' button
and it needs to be turned on to enable remote control between units. Press the remote
buttons on each Blackmagic Duplicator 4K from the second unit all the way down
the chain.
NOTE
Make sure the first unit has the remote button turned off as this will be the
Blackmagic Duplicator 4K that controls all the others in the chain. This first unit, with
the remote turned off, is the master unit and any button pressed on its front panel will
be output from the remote output and this is what controls the downstream units with
their remote buttons turned on. Any television product with RS-422 deck control can
be the master unit as the remote protocol is simply the industry standard deck
control format.
Now all Blackmagic Duplicator 4Ks in the chain are ready to follow the commands of the
first unit.
1
2
3
4
5
REMOTE IN
The 'remote' and 'loop' connectors are used for daisy chaining multiple
Blackmagic Duplicator 4Ks. The loop connector on the last unit in the
chain can also be used to loop the source video to other SDI equipment
such as a Blackmagic SmartView monitor or HyperDeck disk recorder.
For more detailed information about daisy chaining multiple units, refer to the section titled,
'Daisy Chaining Multiple Duplicators'.
6
7
8
9
10
11
12
13
14
15
16
17
18
19
SD/HD/3G/6G/12G-SDI
IN
LOOP OUT
REMOTE OUT
ETHERNET
OPTICAL OUT/IN
REM
LOCK
MENU
20
21
22
23
24
25
www.blackmagicdesign.com
Getting Started
6

Publicidad

loading