Asynchronous slot information change notification is disabled by default and may be configured with the
" notify " command . When enabled , changes in slot state will generate a " 502 slot info :" asynchronous
message with the same parameters as the " 202 slot info :" message .
Retrieving transport information
The " transport info " command returns the state of the transport :
transport info ↵
The server responds with transport specific information :
208 transport info: ↵
status: {"stopped","record"} ↵
display timecode: {timecode} ↵
timecode: {timecode} ↵
The " timecode " value is the timecode within the current timeline for playback or the clip for record . The
" display timecode " is the timecode displayed on the front of the deck . The two timecodes will differ in
some deck modes .
Asynchronous transport information change notification is disabled by default and may be configured with
the " notify " command . When enabled , changes in transport state will generate a " 508 transport info :"
asynchronous message with the same parameters as the " 208 transport info :" message .
Video Formats
The following video formats are currently supported on Blackmagic Duplicator 4K :
SD
525i59 . 94 NTSC
625i50 PAL
HD
720p50
720p59 . 94
720p60
1080p23 . 98
1080p24
1080p25
1080p29 . 97
Ultra HD
2160p23 . 98
2160p24
2160p25
2160p29 . 97
Duplicator 4K supports progressive segmented frame modes , and automatically detects level A and level
B 3G - SDI formats for 1080p50 , 1080p59 . 94 and 1080p60 .
File Formats
Duplicator 4K supports the following file formats :
H . 264Low
H . 264Medium
H . 264High
H . 265Low
H . 265Medium
H . 265High
1080p30
1080i50
1080p50
1080i59 . 94
1080p59 . 94
1080i60
1080p60
2160p30
2160p50
2160p59 . 94
2160p60
イーサネット経由でリモートコントロール
70