Descargar Imprimir esta página

Cisco Linksys WRT54G2 Guia Del Usuario página 16

Router de banda ancha wireless-g
Ocultar thumbs Ver también para Linksys WRT54G2:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 80
Chapter3
RADIUS Server Address
Enter the IP Address of the
RADIUS server.
RADIUS Port
Enter the port number of the RADIUS
server. The default value is 82.
Shared Key
Enter the key shared between the Router
and the server.
Key Renewal Tmeout
Enter a Key Renewal Timeout
period, which instructs the Router how often it should
change the encryption keys. The default Key Renewal
Timeout period is 3600 seconds.
WPA2 Personal
Security Mode > WPA2 Personal
WPA
Algorthm
WPA2
methods, TKIP and AES, with dynamic encryption keys.
Select the type of algorithm, AES, or TKIP + AES. The
default selection is AES.
WPA Shared Key
Enter a WPA Shared Key of 8-63
characters.
Group Key Renewal
Enter a Group Key Renewal period,
which instructs the Router how often it should change the
encryption keys. The default Group Key Renewal period is
3600 seconds.
WPA2 Enterprise
This option features WPA2 used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.
Security Mode > WPA2 Enterprise
Wreless-G Broadband Router
supports
two
encryption
Advanced Configuration
WPA Algorthm
WPA2 supports two encryption
methods, TKIP and AES, with dynamic encryption keys.
Select the type of algorithm, AES, or TKIP + AES. The
default selection is AES
RADIUS Server Address
Enter the IP Address of the
RADIUS server.
RADIUS Port
Enter the port number of the RADIUS
server. The default value is 82.
Shared Key
Enter the key shared between the Router
and the server.
Key Renewal Tmeout
Enter a Key Renewal Timeout
period, which instructs the Router how often it should
change the encryption keys. The default Key Renewal
Timeout period is 3600 seconds.
RADIUS
This option features WEP used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.)
Security Mode > RADIUS
IMPORTANT:
If you are using WEP encryption,
always remember that each device in your
wireless network MUST use the same WEP
encryption method and encryption key, or else
your wireless network will not function properly.
RADIUS Server Address
Enter the IP Address of the
RADIUS server.
RADIUS Port
Enter the port number of the RADIUS
server. The default value is 82.
Shared Key
Enter the key shared between the Router
and the server.
Default Transmt Key
Select a Default Transmit Key
(choose which Key to use). The default is .
WEP Encrypton
Select a level of WEP encryption,
64 bts 0 hex dgts or 28 bts 26 hex dgts. The
default is 64 bts 0 hex dgts.
2

Publicidad

loading