Wi-Fi Protected Setup - Cisco Linksys WRT54G2 Guia Del Usuario

Chapter3
Basic Wireless Settings
Wireless > Basic Wireless Settings (Manual Setup)
Wreless Network Mode From this drop-down menu,
you can select the wireless standards running on your
network. If you have Wireless-N, Wireless-G, and Wireless-B
devices in your network, keep the default setting, Mxed.
If you have only Wireless-G and Wireless-B devices in your
network, select BG-Mxed. If you have only Wireless-N
devices, select Wreless-N Only. If you have only Wireless-G
devices, select Wreless-G Only. If you have only Wireless-
B devices, select Wreless-B Only. If you do not have any
wireless devices in your network, select Dsabled.
Wreless Network Name (SSID)
name shared among all points in a wireless network.
The SSID must be identical for all devices in the wireless
network. It is case-sensitive and must not exceed
32 characters (use any of the characters on the keyboard).
Make sure this setting is the same for all points in your
wireless network. For added security, you should change
the default SSID (lnksys) to a unique name.
Wreless Channel Select the channel from the list
provided to correspond with your network settings. All
devices in your wireless network must be broadcast on
the same channel in order to function correctly.
Wreless SSID Broadcast
When wireless clients survey
the local area for wireless networks to associate with, they
will detect the SSID broadcast by the Router. To broadcast
the Router's SSID, keep the default setting, Enabled. If you
do not want to broadcast the Router's SSID, then select
Dsabled.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
Wreless-G Broadband Router
The SSID is the network
Advanced Configuration

Wi-Fi Protected Setup

There are three methods available. Use the method that
applies to the client device you are configuring.
Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)
Wi-Fi Protected Setup > Congratulations
NOTE: Wi-Fi Protected Setup configures one
client device at a time. Repeat the instructions
for each client device that supports Wi-Fi
Protected Setup.
Method #1
Use this method if your client device has a Wi-Fi Protected
Setup button.
1. Click or press the W-F Protected Setup button on
the client device.
Click the W-F Protected Setup button on this
2.
screen.
0