Spare Parts; Replacing The Wind Screen; Replacing The Ear Cushions - Sennheiser NoiseGard HMEC 300 Manual Del Usuario

134

Spare parts

The following spare parts are available from your Sennheiser agent:
•
Wind screen for MKE 45-1 electret microphone
•
Ear cushions
•
Headband padding
•
Cable clip
•
Carry and storage bag with shoulder strap

Replacing the wind screen

If the wind screen for the electret microphone shows signs of wear such as tears or holes,
replace the wind screen. Pull the wind screen from the microphone. Gently slide-on the
new wind screen and ensure that it fits securely over the microphone.

Replacing the ear cushions

Replace the ear cushions if they are damaged. Grasp behind the ear cushions and pull
them up and away from the earcups. Slide the new ear cushions onto the earcups.
For best results replace the ear cushions after 100 hours of use or two years.